VOLTCRAFT VC940 - V06-09 Instrucciones de operaciones Pagina 41
- Pagina / 45
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
MultiSystem 4010
Operating Instructions
© Hydrotechnik GmbH • All rights reserved
Rev. 1.5 / 120816 english
Page 41 of 45
6.10. Instrument Settings
Highlight the item „Device“ in the main menu and press :
These are the two screens with basic device settings. Press
to toggle between both pages. They
contain these options:
Language operation language of the instrument
Date current date, used in the names of measuring series
Time current time, used in the names of measuring series
ISDS enables the automatic detection of sensors with Hydrotechnik ISDS; this option
should be enabled if you use such sensors; if you want to use ISDS sensor for
unusual purposes (e.g. pressure sensors to measure force), you should disable
this option; if you select “Yes preferred”, detected ISDS sensors will be selected for
display and recording automatically
Units select between metric (SI) and anglo-american (US) unit system (e.g. bar – psi)
Filter enable / disable filtering
Filter settings see section 6.10.2 on page 42
Company enter the name of your company; this will be saved together with measuring data
Baud rate RS232 select the transmission speed of the RS 232 interface
Confirm the settings with
. Use three function keys to open submenus:
dialog to set the CAN parameters (option, see section 6.10.1 on page 41)
further instrument settings (see section 6.10.3 on page 43)
information on the instrument (see section 6.10.4 on page 44)
6.10.1. CAN settings
Open the submenu „Device“ from the main menu and press :
Here you may set the parameters of the optional CAN function:
- MultiSystem 4010 1
- Rev. 1.5 / 120816 english 2
- 1. Safety 3
- 2. Introduction 4
- 2.4. Use as Agreed 5
- 2.5. Warranty Regulations 5
- 2.7. Authorized Personnel 5
- 3.2. Inputs and Connectors 6
- *: 1 mA constant current 9
- 3.3. Display 10
- 3.4. Keyboard 11
- 3.5. Evaluation Software 12
- 3.6. Technical Data 12
- 4. Start-up 13
- 5. First Steps 14
- 5.3. Set Date and Time 15
- 5.4. Connect Sensors 16
- 5.6. Collect Measuring Data 17
- 5.8. Delete Measuring Data 18
- 6. Operation 19
- 6.2. Measured Value Display 20
- 6.3. Main Menu 21
- 6.4. Configure Channels 22
- 6.5. Configure Display 31
- 6.6. Program a Recording 33
- 6.7. Start a Recording 35
- 6.10. Instrument Settings 41
- 7. Cleaning and Maintenance 44
Relacionado con productos y manuales para Multímetros VOLTCRAFT VC940 - V06-09
Multímetros VOLTCRAFT VC 220 Manual de usuario
(9 paginas)
(9 paginas)
(32 paginas)
(37 paginas)Electrolux EKM101199X manuels
Manuels d'utilisation et guides de l'utilisateur pour Fours Electrolux EKM101199X.
Nous fournissons des manuels en pdf 1 Electrolux EKM101199X à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comentarios a estos manuales