VOLTCRAFT VC940 - V06-09 Instrucciones de operaciones descargar pdf (Pagina 35)

MultiSystem 4010

Operating Instructions

Rev. 1.5 / 120816 english

Page 35 of 45

6.7. Start a Recording

Highlight the item „Memory“ in the main menu and press :

Several data regarding the intented recording are displayed here. Beside current date and time (these

are used to identify the recording and as file name) you can see the most important recording

parameters as set in the memory menu (see section 6.6 on page 33).

Here you have to additional options:

Mode select between STANDARD (recording will be executed once) and CYCLIC (after

the recordinf the instrument will be on stand-by to repeat the recording with identic

parameters)

Note you may add some text to the recording that will be saved together with the

measuring data

Press

to start the recording. The instrument will immediately start to record measuring data, if no

trigger has been defined. If trigger and pretrigger are defined, the instrument will immediately start to

fill the trigger buffer. The recording starts as soon as the trigger event happens.

Key as Trigger

If you have selected the trigger event „Key“(see section 6.6 on page 33), you may start the recording

with one key pressure:

The recoding bar in the left lower corner indicates that the trigger buffer is full and takes 20 % of the

total recording time. Press

to start the recording. Press to stop the recording. Then a

shortened measurement series will be written into the memory.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 44 45

Sin comentarios

VOLTCRAFT VC940 - V06-09 Instrucciones de operaciones Pagina 35